| |
| |
 |
| |
These boots are made for walking, trotting,
jogging, jumping and just having a great time!
The SIMPLE Boot is a Multi-Purpose Hoof Boot, excellent for:
- All-terrain hoof protection for the barefoot horse
- Comfort for chronic pain or hoof sensitivity
- Rehabilitation from injuries, abscesses, navicular disease,
laminitis / founder,
punctures, sole bruising and contracted heels
- Protection during trailering and breeding
- Your peace of mind: Take on rides as a “spare tire” for
lost shoes
|
| |
SIMPLE Boot Features and Benefits
- Lightweight
- Built-in drainage
- Simple to put on and remove; stays securely on hoof
- Shaped for the natural hoof (needs no inserts or shims)
- Simple front fastening with industrial grade Velcro® closures
- Absorbs shock — so your horse’s legs don’t
need to!
- Genuine leather upper is comfortable and flexible
- Mould-in back flap for bulb protection and abrasion resistance
- Durable construction: Waterproof thread, rustproof metal and
high performance TPU outsole
- Promotes healthy hooves: allows expansion and contraction,
and increased blood circulation
- Softee leather foam-filled collar (Cavallo Pastern Wraps are
available for added protection if desired)
- Built-in sole relief: Raised inner rim takes pressure
off sole, bar and frogs
|
| |
 |
The SIMPLE Boot is SIMPLE to MEASURE!
Measure the weight-bearing hoof surface carefully
after a fresh trim.
(Do not include heel bulbs.)
Stay within the size ranges indicated below.
We have allowed for growth between regular trims.
If
your horse’s hoof width is greater than the length from
buttress to toe, then
the Simple Boot may not be suitable for your horse.
|
|
| |
BEFORE YOUR FIRST RIDE:
Only UNUSED boots can be exchanged. To keep the boot clean,
we suggest covering the hoof with thin plastic and checking fit
on a clean dry surface
.
Like your own riding boots, it is recommended that time is taken
to gradually break in your SIMPLE Boots. If your horse has
sensitive skin, or if you are going on a long ride and are concerned
about potential rubbing, Cavallo Pastern Wraps are available. If
your horse is fine boned and there is excess space between the
pastern and the boot collar, wraps can also prevent major debris
from entering the boot.
SIMPLE FITTING TIPS:
- SOLE: The sole of the hoof should fit securely
inside the boot sole. Ensure that the entire weight-bearing
wall from front of toe to heel buttress sits within the Simple
Boot outsole. It may be helpful to compare the outside
raised tread area at the bottom of the boot to the weight-bearing
length of the hoof sole (toe to buttress as per diagram above).
- OUTER COVER: Ensure that the boot tongue is
pushed firmly against the hoof. Draw the outer flaps firmly around
the hoof, pressing the Velcro on the flaps against the Velcro
on the tongue; keep taut and level.
- TWISTING: If the boot twists or moves
excessively, it may be too big or the outer cover may be loosely
fastened.
- TOO SMALL: If you have difficulty putting
the boot on, it may be too small. Ideally the boot "snaps" nicely
onto the hoof for a good fit. Please check your measurements
against the chart above.
- PASTERN WRAPS may be used to assist in the
breaking-in process to prevent chafing.
|
| |
ONCE THE BOOT IS FITTED, if the strap extends
beyond the nylon keeper, then you can cut the strap to the
preferred length, leaving a line of stitching to prevent unraveling.
PLEASE NOTE: Boots cannot be exchanged if
straps have been cut. Be sure boots are correct size BEFORE cutting.
|
 |
|
| |
 |
Too often over the past years, we have had reports
of people returning to metal shoes because their horses would
remain sore while barefoot. We made massive attempts to educate
and inform trimmers, horse owners and farriers how to manage
and trim the feet. The most common problem was when a horse without
hoof function and concavity was trimmed in the conventional way
and simply left without shoes, putting the hoof on sensitive
sole tissue. Our Simple horse boot addresses this potential problem
by providing a slightly raised rim around the inside of the sole.
It is not even 1 mm high and does not interfere with the counter
force of a flat surface for expansion, but it is enough to provide
extra sole relief for this common problem. It can also allow
further comfort between trimmings.
|
Unique Outsole:
- Outside tread pattern supports the hoof wall
- All-terrain tread minimizes build-up of mud, sand and debris
- Excellent traction while still allowing natural movement
- Center of outsole is recessed to minimize pressure
- High performance specially-formulated thermo plastic urethane
(TPU) compound provides maximum protection, tensile
strength, durability, and abrasion resistance
|
Cross-section back view of SIMPLE Boot sole
showing 0.6 mm thick Inner Sole Relief
for added comfort. Does not interfere with
normal hoof function.
 |
|
| |
| |
|
